|
Kotec Corporation 21-15, 3 - Cho Cayamadai, Sakai, Osaka, Japan 590-0115 We represent Kotec Corporation in Europe. |
|
|
|
Polycarbonate Grades |
| Grade | Viscosity | Application |
| K 20 | lower | Injection grade for thin wall moulding with enhanced flow |
| K 30 | low | General purpose injection grade |
| K 40 | medium | General purpose injection grade |
| K 20 MRA | lower | Injection grade for thin wall moulding with enhanced flow and mould release |
| K 30 MRA | lower | General purpose injection grade with mould release |
| K 40 MRA | medium | General purpose injection grade with mould release |
| K 20 UV | lower | Injection grade for thin wall moulding with enhanced flow and UV stabilization |
| K 30 UV | low | General purpose injection grade with UV stabilization |
| K 40 UV | medium | General purpose injection grade with UV stabilization |
| K 30 FR | low | Injection grade with flame retardant (UL-94 V-0 @3.0mm) |
| K 75 E | high | Sheet Extrusion |
| K 75 EUV | high | Sheet Extrusion with UV stabilization |
| KG 10 MRA | Injection grade with 10% glass fiber and mould release | |
| KG 15 MRA | Injection grade with 15% glass fiber and mould release | |
| KG 20 MRA | Injection grade with 20% glass fiber and mould release | |
| KG 30 MRA | Injection grade with 30% glass fiber and mould release | |
| KGN 10 MRA | Injection grade with 10% glass fiber, mould release and flame retardant (UL-94 V-0 @1.7mm) | |
| KGN 15 MRA | Injection grade with 15% glass fiber, mould release and flame retardant (UL-94 V-0 @1.7mm) | |
| KGN 20 MRA | Injection grade with 20% glass fiber, mould release and flame retardant (UL-94 V-0 @1.7mm) | |
| KGN 30 MRA | Injection grade with 30% glass fiber, mould release and flame retardant (UL-94 V-0 @1.7mm) |